Pellet Machine

Good quality organic fertilizer pellet making machine for sale

Ring die organic fertilizer pellet making machine is a type of granulator. The disc organic fertilizer pellet making machine is lined with high-strength glass fiber reinforced plastic. It has the advantages of uniform granulation, high granulation rate, stable operation, sturdy equipment and long service life.

The disc organic fertilizer pellet making machine is suitable for the processing of bio-organic fertilizer spherical particles, such as coal powder, cement, clinker, fertilizer and other materials. The organic fertilizer pellet machine granulation disc adopts the overall arc structure, and the granulation rate can reach more than 93%.

The granulation tray is provided with three discharge ports, which is convenient for intermittent production operations, greatly reduces labor intensity and improves labor efficiency. The reducer and the motor are driven by flexible belts, which can start smoothly, reduce the impact force and improve the service life of the equipment.

The bottom of the organic fertilizer pellet machine granulation pan is made of multiple radiating steel plates, which are firm and deformed. Thickened, heavier and sturdier base design, no need for anchor bolts, and stable operation.

1. The principle of organic fertilizer pellet making machine:

The working principle of this series of rotary drum organic fertilizer pellet making machines is: the main motor drives the belt and pulley, and the drive shaft is driven by the reducer, and the split gears installed on the drive shaft are in phase with the large gear ring fixed on the body.

The material is added from the feed end and passes through the inside of the cylinder. Under the action of the special structure inside the cylinder, it is made into granules, and then flows out through the discharge port. Due to the continuous entry of materials and the continuous rotation of the organic fertilizer pellet making machine, mass production can be achieved.

2. Features of organic fertilizer pellet machine:

It adopts a new granulation process integrating multi-functions such as rotation, spheroidization, polishing, densification, heating and drying.

The spiral slewing mechanism adopts high-strength alloy material, which is durable and prolongs the life of the equipment.

The material moisture can be granulated between 30% and 40%, and the output moisture is about 30%, which reduces the traditional drying requirements of 70% moisture and effectively reduces the production cost of organic fertilizer.

During the granulation process, a temperature of 50-65 degrees is generated in the cylinder, which reduces the moisture content of the discharged granules by 5-8 points, thereby reducing the drying cost requirement.

The granulated pellets by organic fertilizer pellet making machine are uniform, smooth, round and high in strength, and the particle forming rate is over 95%.

Adjust the size of the discharged material by adjusting the water content of the feed, so as to meet the requirements of different size of the material.

The fineness of the feed material can be controlled at about 20 mesh, which improves the pulverization process requirement of at least 80 mesh in traditional granulation.

3. Range of organic fertilizer pellet making machine:

Granulation of livestock and poultry manure, composted fertilizers, green manures, sea fertilizers, cake fertilizers, peat, soil and miscellaneous fertilizers, three wastes, microorganisms, municipal solid waste, and organic fermented fertilizers.

This organic fertilizer pellet making machine is suitable for the granulation of light and fine powder materials. The finer the basic particles of the fine powder material, the higher the sphericity of the particles and the better the quality of the ball. Typical application materials: chicken manure, pig manure, cow manure, charcoal, clay, kaolin, etc.

4. Use of organic fertilizer pellet making machine:

Drum organic fertilizer making machine is a kind of granulation equipment commonly used in the production of compound fertilizers, organic fertilizers, biological fertilizers, controlled-release fertilizers and other fertilizers. Production.

5. About organic fertilizer machine manufacturer

Richi Machinery has strong technical force, perfect quality assurance system, and implements a one-stop management model from production to after-sales service. The various organic fertilizer pellet making machine and organic fertilizer pellet production lines produced by RICHI are favored by the majority of users for their high quality, good performance, simple operation and high degree of automation.

Years of production and sales have enabled our company to establish a good cooperative relationship with the vast number of fertilizer factories, various raw material companies, and technical fertilizer companies.

Our company provides one-stop service, from organic fertilizer pellet making machine purchase to raw material purchase and formula consultation to meet the needs of the majority of users, our factory is a professional manufacturer, different from various agencies, so the cost performance is very obvious, our goal is to work with you develop.

Richi Machinery specializes in the production of organic fertilizer granulation equipment, which is used for the molding equipment of organic fertilizers and organic-inorganic compound fertilizers from powder to granular. It is suitable for a wide range of materials, with high spheroidization rate and large output. Liquid trace elements can be added in production. ,improve product quality.

The organic fertilizer pellet making machine granulating mechanism is novel and reasonable, with reduced weight and height. The process layout is flexible and convenient.
The inclination of the large plate can be adjusted. The use of angle shims is flexible and convenient to adjust.
Using a unique combination of unpowered scrapers from organic fertilizer pellet making machine to reduce auxiliary power consumption.

Floating fish feed making machine and grinder price

Pellet Making Machine

Nowadays, family farming is becoming more and more common. Recently, many farmers have called for consultation of small floating fish feed making machine. Generally, they raise pigs, chickens, rabbits, fish, etc. at home. The required output is not high.

There are corn, soybean meal, etc. at home, so if you want to make full use of these raw materials to prepare homemade fish feed. For these individual farmers, RICHI recommends that the majority of farmers use the 120-type single-phase floating fish feed making machine. Household lighting electricity can make the feed pellet machine produce normally.

Generally, household electricity is 220V, and commercial electricity is 380V. For individual farmers, the feeding scale is small, and the daily output required is not high. Therefore, most farmers will choose single-phase electric small floating fish feed making machines.

The single-phase floating fish feed making machine has low power and low energy consumption, and can produce 60-100 kg of feed per hour. It is specially used for family farming and small farms. The following are the model parameters of RICHI electric floating fish feed extruder.

1. Features of electric floating pellet machine

The floating fish feed making machine does not need to add water in the granulation process, and the starch can be gelatinized after natural heating, the internal maturity of the granules is deep and transparent, the surface of the granules is smooth and the hardness is moderate, which can be convenient for farmers to store and transport.

Small and medium-sized floating fish feed mills reduce breeding costs and increase economic income.

Improve animal palatability and increase feed intake. Due to the large feed density, reduced volume and high nutrient concentration, the animal feed intake will increase accordingly.

Prevent animal aqua from being picky eaters and reduce feed waste. Because the pellet feed is uniform in size and comprehensive in nutrition, it ensures the integrity and full price of dietary components, avoids animal aqua fish selecting feed according to their palatability, and reduces the amount of feed to the air and water.

Reduce breeding costs and increase economic benefits.

2. Floating fish feed making machine quotation

Although the output of the small floating fish feed machine is not large, it has powerful functions and can be used to process pellet feeds such as chickens, rabbits, pigs, and fish. It belongs to a multi-purpose mini floating fish feed machine, can meet the needs of the majority of farmers.

The advantages of this type of fish feed floating pellet making machine are that it occupies a small area, is easy to operate, and the price is quite cheap. Of course, users can choose according to the output they need, because RICHI also has large-volume machines for users to choose.

For individual family farmers, the two-phase electric small floating fish feed making machine is the most suitable. The small feed pellet machine is specially designed for small farms and family farmers. It adopts household lighting and has the advantages of small investment, simple operation and easy maintenance.

The advantages of high grain production, regardless of its small size and powerful functions, can be processed to produce various animal feeds, such as pigs, sheep, cattle, rabbits, chickens, ducks, geese, pigeons, aquatic fish feed, etc.

Farmers only need to choose different apertures to process pellets of different sizes according to the animals they raise, or they can choose floating fish feed making machine mold plates with different compression ratios according to the raw materials used to make different animal feeds.

The produced feed pellets have the advantages of smooth surface, moderate hardness and balanced nutrition, which can increase animal feed intake, facilitate digestion and absorption, dry in and dry out, facilitate storage, and facilitate transportation.

3. How much does the feed hammer mill cost?

The pulverizer is also the hammer mill commonly used by farmers. The work before and after processing feed is to pulverize the raw materials. Pulverization is one of the important processes in compound feed processing. The quality of pulverized raw materials directly affects the quality of feed pellets. Hammer mill is a general-purpose mill with wide adaptability and simple operation. It is generally used in individual farmers and small floating fish feed production line.

Some new users will be entangled in whether to buy a pulverizer when choosing a small floating fish feed making machine?

The answer must be based on the needs of users. The raw materials of the powder do not need to be processed by a pulverizer. For example, some users do not need to pulverize the raw materials used by wheat bran.

In this way, only a small floating fish feed making machine can process perfect feed pellets! Some users also use larger raw materials, such as corn stalks, which require a pulverizer for pretreatment and reprocessing.

In short, as long as the size of the raw materials used does not exceed the size of rice grains, the floating fish feed making machine can be used to directly process the feed.

How much does such a powerful small feed pellet machine and pulverizer cost? For example, a farmer needs a machine with small output and recommends the 120 type floating fish feed making machine.

Because of the user’s raw material problem, it needs to be equipped with a single-phase electric 158 type crusher, if these two machines are in the regular professional floating fish feed making machine manufacturer, the price will probably cost a few thousand USD.

Complete set pellet making machine for poultry feed

Pellet Making Machine

Pellet making machine for poultry feed is a professional equipment for producing feed. It is another new product developed and launched by the excellent technical team of Richi Machinery after years of follow-up on the site of users and absorbing rational suggestions.

Poultry feed pellet making machine SZLH Series Ring Die Pellet Machine is a new type of feed processing machinery independently developed by Richi Machinery technicians with independent intellectual property rights.

The machine is simple in structure, easy to operate, stable in operation, and can work continuously. The gearbox of pellet making machine for poultry adopts high-precision gear transmission, and the hydraulic oil delivery system can automatically circulate oil between the gearbox and the main shaft bearing.

When the machine is working, the oil pump continues to work, and the machine works under the circulation of oil, which can extend the main shaft and gearbox gear. service life. The working parts of the Poultry feed pellet making machine (die plate, pressing roller) are made of alloy steel, and the hardness after heat treatment can reach more than HRC50, which ensures the continuous operation of the machine and prolongs the service life of the pellet making machine for poultry feed.

Poultry feed pellet making machine is suitable for processing corn, soybean meal, straw, grass, cottonseed skin, peanut shell and other raw materials into high-density pellets. Feed pellets are used for raising livestock and are convenient for storage and transportation.

1. Scope of application:

Poultry feed pellet making machine is suitable for large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.

2. Why use a poultry feed pellet making machine to process feed?

Feed pellets are used for raising livestock, which is convenient for storage and transportation. The produced feed by poultry feed pellet making machine has high hardness, smooth surface and internal curing, which improves the nutrition of livestock, is easy to digest and absorb, and reduces adverse effects on digestion.

Kill various parasites and pathogenic microorganisms, reduce worms and digestive system diseases. Improve the nutrient absorption conversion rate, easy to eat, and improve the palatability of the feed.

3. Advantages of pellet making machine for poultry feed:

(1) Scientific and reasonable structural design, reliable quality and high efficiency;

(2) The operation is stable, the noise is low, and the operation is simple and convenient;

(3) The poultry feed pellet making machine has high output;

(4) Simple and convenient operation, low energy consumption. Reasonable design, more convenient maintenance;

(5) The forming rate of the pellets from poultry feed pellet making machine are high;

(6) The poultry feed pellet making machine can process different kinds of materials and has a wide range of applications;

(7) International CE certification and ISO9001 certified poultry feed pellet making machine.

4. Working Principle of poultry feed pellet making machine

The motor of the pellet making machine for poultry feed drives the main shaft through the hypoid bevel gear, and the main shaft drives the pressing roller to rotate. When processing raw materials, the raw materials are fed into the feeding chamber of the ring die poultry feed pellet making machine, and the materials all fall on the flat die.

The main shaft drives the pressure roller to rotate, the pressure roller continuously rolls through the material layer, and squeezes the material into the die hole. The knife cuts the material to form particles, and the particles are sent out by the throwing disc.

When the machine is working, the relative movement between the pressing roller and the pressing die clamps, compresses and compacts the material into the die hole, and forms particles through the die hole. The poultry feed pellet making machine is driven by the motor to drive the reducer, the reducer drives the main shaft, the main shaft drives the pressing roller frame to run, and the pressing roller rotates while revolving.

5. Safety regulations for daily operation of poultry feed pellet making machine

(1) Workers wear tight work clothes, do not open the cuffs, do not wear gloves, wear protective caps and dust masks, and must concentrate when operating.

(2) Check the oil level of the reducer, the oil level of the main shaft bearing of the pellet making machine for poultry feed and the bearing of the pressure roller.

(3) Familiar with the working principle of the poultry feed pellet making machine and the structure and function of each part.

(4) Check whether there is any debris in the poultry feed pellet making machine and whether the screws are loose, adjust the spindle nut with a wrench and then lock it.

(5) The motor of the poultry feed pellet making machine must be started with no load before it can work, and the direction is strictly prohibited.

(6) It is strictly forbidden to open the door of the machine at will during the production process, and do not reach into the granulation room.

(7) The poultry feed pellet making machine must be grounded safely, and the main power supply must be disconnected before checking the machine.

(8) When working, check and remove the metal on the magnetic separator at the entrance at any time, pay close attention to the working conditions, and shut down in time if any abnormality is found.

6. Product Features of pellet making machine for poultry feed

(1) The seal of the pressing roller and the main shaft bearing of the poultry feed pellet making machine adopts a fully enclosed design, the bearing and grease are free of pollution, the bearing life is long, and the equipment maintenance time is saved.

(2) The overall pressing roller of the poultry feed pellet making machine adopts a three-roller design to improve the pressing work efficiency, and the pressing roller is suitable for a wider range of raw materials.

(3) The material of the die plate of the poultry feed pellet making machine has been fully upgraded, the alloy steel is forged and processed, and after vacuum heat treatment, the material is wear-resistant, high in hardness and long in service life.

(4) The die hole of the die plate of the poultry feed pellet making machine is processed by automatic CNC drilling, with high processing precision and good finish, which can improve the productivity of the machine and reduce the production cost.

The reduction box of the pellet making machine for poultry feed adopts hypoid bevel gear, which has high transmission efficiency, stable transmission, high bearing capacity, reliable operation, compact structure, energy saving, material saving, space saving, wear resistance, long life and noise

Pellets from biomass energy machine vs other fuels

Biomass Machine

With the increase of society’s demand for energy, the storage of fossil energy is drastically reduced. Energy mining and coal combustion emissions are one of the main factors that cause environmental pollution.

Therefore, the development and use of new energy has become one of the important tasks of current social development. Under this trend, the emergence of pellet fuel produced by biomass energy machine has attracted much attention since its promotion and use. The following editor will analyze the advantages of biomass pellet fuel compared with other fuels:

(1) Raw materials.

The raw material source of biomass energy machine is mainly agricultural planting waste, and agricultural resources mainly include waste in agricultural production and processing and various energy plants. Such as corn cob, peanut shells, etc., can be used as raw materials for the production and processing of biomass pellet fuel.

This not only reduces the environmental damage caused by the burning or decomposition of agricultural and forestry wastes in the field, but also increases farmers’ income and creates employment opportunities. Compared with conventional fuels, biomass pellet fuel not only brings economic benefits to users, but also makes it a model of environmental protection advocacy.

(2) Emissions.

When fossil fuels are burned, a large amount of carbon dioxide is released, which is the main greenhouse gas of global warming. Burning fossil fuels such as coal, oil or natural gas is a one-way process of releasing carbon dioxide deep inside the Earth into the atmosphere.

At the same time, more dust, sulfur oxides and nitrogen oxides will be produced. The sulfur content of biomass pellet fuel is relatively low, and the carbon dioxide released by it is relatively low, which can be said to have zero emissions compared with coal combustion.

(3) Heat production.

Biomass pellet fuel made by biomass energy machine can greatly improve the combustion performance of wood materials, which is even better than that of coal combustion.

(4) Management.

Biomass pellets made by biomass pellet making machines are small in size, do not occupy additional space, and save costs in transportation and storage management.

1. Biomass fuel pellet combustion decoking method

Biomass pellets are solid fuels that increase the density of agricultural wastes such as straw, rice husks, and wood chips by compressing agricultural wastes such as straws, rice husks, and wood chips into specific shapes through a biomass energy machine. It can replace fossil fuels such as coal and be used in civil fields such as cooking and heating, and industrial fields such as boiler combustion and power generation.

Due to the high content of potassium in the raw material of biomass fuel pellets, its presence reduces the melting point of ash, while silicon and potassium form low-melting compounds during the combustion process, resulting in a lower softening temperature of ash.

Under high temperature conditions, softening The ash deposits are easily attached to the outer wall of the heating surface pipes, forming coking accumulations. In addition, because the manufacturers of biomass pellets do not control the moisture of the products in place or there are differences, and there are many impurities in the raw materials, combustion and coking will occur.

The production of coking will undoubtedly have an impact on the boiler combustion, and even affect the combustion utilization rate of biomass fuel pellets, resulting in less fuel heat generation, which in turn leads to an increase in fuel consumption.

In order to reduce the occurrence of the above phenomena, we can start from several aspects in actual production and life:

(1) Continuously improve the production technology of biomass energy machine products, and strictly control the water content of pellets.

(2) The selection and processing of raw materials are meticulous and effective, and the quality of pellets is improved.

2. The status quo and development of biomass fuel

The status quo and development of biomass fuel conversion and utilization technology and the choice of boiler industry:

Industrial boilers are important thermal power equipment and play an indispensable role in the development of the national economy and people’s lives. At present, my country’s industrial boilers are mainly coal-fired, and the annual coal consumption accounts for about 1/5 of the country’s total coal consumption, and the total pollutant emissions are second only to power station boilers.

With the country’s increasingly strict environmental protection requirements, small and medium-sized coal-fired boilers with serious pollutant emissions will be gradually eliminated in my country and replaced by high-efficiency, energy-saving and environmentally friendly boilers that use new energy such as natural gas, electricity or biomass as fuel.

As a large agricultural country, my country is rich in biomass resources and has huge potential for energy utilization. The total biomass resources such as crop straws and agricultural product processing residues, forestry residues and energy crops, household wastes and organic wastes that can be used as energy sources in the country are about 460 million tons of standard coal per year.

Biomass, as a carbon-containing, solid form of renewable energy, has similar thermal conversion and utilization technology and equipment to coal, and biomass has low nitrogen and sulfur content, and its pollutant emissions are much lower than coal-fired. Therefore, vigorously developing biomass fuel boilers will help alleviate the environmental pollution problems caused by coal combustion.

Biomass energy machine compression molding technology is a simple, practical and efficient utilization form of biomass energy, which can greatly improve biomass energy density, facilitate storage and transportation, and provide a new way to utilize agricultural and forestry wastes.

After the biomass is extruded into biomass fuel pellets, the density can reach 0.8-1.3kg/m3, and the energy density is equivalent to that of medium-calorific coal, which is very suitable for boiler fuel.

3. About the biomass pellet production line

The biomass energy machine production line has become the representative of the new era

With the promotion of environmental protection and the reduction of raw materials in various countries, the biomass energy machine production line has developed for a long time. The following will introduce the advantages of the biomass pellet production line, hoping to help you:

（1）The raw materials required for the biomass energy machine line are sufficient: the main material for the biomass energy machine line is waste wood chips. The output of such materials in my country is very large and needs to be processed. Domestic waste, the furniture industry will produce a large amount of waste wood every moment.

If these waste wood are directly discarded, it will pollute the environment and waste renewable resources. It is a problem that local governments have been concerned about. In this case, a machine that can process waste wood and turn waste into treasure It is particularly important, and the importance of the pellet machine production line at this time appears.

（2）The demand for biomass energy machine production line has increased: as the price of grain is getting higher and higher, the crops that were directly discarded can be processed by the biomass pellet machine production line, and become fuel pellets that can be directly sent to power plants to replace coal and used as new energy. This greatly reduces the cost and is recognized by more and more customers.

RICHI Machinery is a industrial group mainly specialized in the biomass pellet mill for sale, , and also covers some other strategic businesses such as animal feed machinery, organic fertilizer pellet machine, parts and components and so on. RICHI Machinery has covered more than 109 countries and regions around the world from 1995, products are exported to the Middle East, South America, Africa, Southeast Asia and high-end markets such as Europe and the United States.

What are raw materials for wood pellet mill for sale?

Wood Mchine

When it comes to wood pellet mill for sale, I believe that many customers know that a wood pellet machine is a mechanical device that can turn wood pellets into biomass fuel pellets.

Biomass fuel pellets have a high combustion rate and realize resource reuse. Today, Richi Machinery will introduce you the raw material sources and requirements of the wood pellet machine to help you make better use of the wood pellet mill for sale.

1. What are the raw materials that can be pressed by wood pellet mill for sale?

(1) Small shavings in furniture factories: Furniture factories produce a large amount of shavings every day, and the wood pellet machine can make these shavings into biomass pellets to realize resource reuse. Because the particle size of the shavings is relatively large, it is easy to cause the wood pellet mill for sale to be blocked, so it needs to be crushed before it can be used.

(2) Crop residues: Crop residues include cotton straw, wheat straw, straw, corn stalk, corn cobs and some other grain stalks. The wood pellet machine can make these residues into biomass pellets to realize resource reuse.

These “crop residues” also have some other uses. For example, corn cob can be used as the main raw material for the production of xylitol, furfural and other chemical products; various straws such as corn stalk, wheat orange, cotton stalk are treated and mixed with resin Fiber board can be made; straw can also be directly returned to the field as fertilizer.

(3) Sawed sawdust: The sawdust has a good particle size, the output of the pellets is stable, the pellets are smooth, the hardness is high, and the energy consumption is low.

(4) Wood chips and scraps of wood chips: Because of the large size of wood chips and scraps of wood chips, it is easy to block the sawdust pellet machine and can only be used after being crushed.

(5) Fibrous material: The length of the fiber should be controlled for the fibrous material, generally the length should not exceed 5mm, otherwise the sawdust wood pellet mill for sale.

The use of wood pellets not only solves the storage of waste, but also brings new benefits.

2. Biomass wood pellet mill for sale realizes resource transformation

Every autumn and winter, the problem of straw burning is repeated. In order to realize the transformation of straw into treasure, biomass pellet machine came out. There are many benefits of biomass wood pellet mill for sale, such as: cleaning, turning waste into treasure, increasing farmers’ income, ensuring national energy security and so on. Today, Richi Machinery will give you a good introduction to our biomass pellet mill machine.

Because wind energy, water energy, etc. can only generate electricity, while biomass energy can not only generate electricity, but also control oil and generate gas, which can meet the needs of aircraft, automobiles, ships, etc. using liquid and gas fuels.

Therefore, compared with other new energy sources such as wind energy, hydro energy, solar energy, and nuclear energy, biomass energy is the only product that can fully replace traditional fossil energy.

The biomass wood pellet mill for sale uses a wider range of raw materials, including straw, cotton stalks, fallen leaves, etc., which can be used for it, so it can play the role of “turning waste into treasure”. my country is rich in biological natural resources.

The number of straws alone is 700 million tons every year. Most of them are not used, but cause air and water pollution. The emergence of biomass pellet press machine can solve this problem.

However, when these new energy products were just starting to develop, due to too little output, the cost was far greater than the prices of existing products on the market. In this case, the government should have corresponding fiscal and tax policy support to make it survive.

At present, there are dozens of biomass energy projects under construction in Europe and the United States, with an annual output of more than 100,000 tons. In the next 2-3 years, these projects will be put into operation one after another, which may form a “second wave” of biomass energy.

3. Ring die vs flat die for fuel wood pellet mill for sale

Which is better, ring die or flat die for pellet production by fuel pellet machine?

Answer: The ring die wood pellet mill for sale is better, the flat die is the second.

Before saying that the wood pelletizer machine is good, let’s analyze the raw materials for making wood pellets. Common raw materials for wood pellets are sawdust, straw, etc. Of course, pellets made from straw are called straw pellets. Both sawdust and straw are crude fiber materials. The characteristics of this non-material are that the crude fiber content is high, the specific gravity is light, and the fluidity is poor.

These characteristics of the material determine that a good fuel wood pellet mill for sale must be able to overcome these characteristics of the material. From the structure, the material must be fed smoothly, so that the material can be evenly distributed in the production process.

To make the material feed smoothly, the best way is to feed horizontally. There is no detour in the middle, and there will be no blockage, and the horizontal ring die wood pellet mill for sale, which is the pellet machine we often use to make feed, is not horizontal, but has an included angle.

This results in poor feed let alone output. In addition, the vertical ring die wood pellet machine has better sealing performance and higher temperature in the machine, which is easy to cause fire. Fire is a terrible danger for wood pellets. In the event of a fire, almost the entire production line can be destroyed. Therefore, the vertical ring die wood granulator is in the back.

The flat die wood pellet mill for sale is vertical feeding and has good ventilation, and even many small-volume manufacturers use it again.

However, because the working principle is that the pressure roller rotates and the mold is fixed, this results in uneven distribution of materials, and then one is that the output is not high enough, and the other is that due to uneven force, the mold is easily damaged, which increases production costs. Therefore, the flat die pellet machine ranks second.

The ring die fuel wood pellet mill for sale is a pellet machine specially designed for wood chips, so everything is not a problem. The ring die wood pellet pressing machine has several advantages that make it suitable for pressing wood pellet fuel:

Vertical feeding
The pressure wheel rotates.
The material is evenly distributed under the influence of centrifugal force.
Large output and high stability.
The mold has a long service life.